What are the specifications of computer panel saws?

Instructions for operation of computer panel saw

1.Before the machine tool starts, it is necessary to carefully check whether the saw blade pads, compression nuts, and screws in each part are firm. If loosening is found, it should be fastened in time.When installing the saw blade, pay attention to the cutting direction, which is irreversible.

2.Push table saws do not allow the saw blades to work without a protective cover.

3. When manually feeding the table saw, the wood must be kept close to the workbench and positioned against the board. The hand must not be too close to the saw blade. It is strictly forbidden to process wood that cannot be controlled by the hand.

5.Before the wood is processed, it should first be checked for nails, gravel, joints, etc. where the wood is sawed to prevent damage to the saw blade and joints from flying out and hurting people.

6.No one can stand in the cutting direction of the push table saw, and the operator should also pay attention to safety when collecting wood.Computer panel saw

7.When cleaning the machine tool, wiping lubricating oil, disassembling the saw blade and removing sawdust, the power supply needs to be cut off first.

8.When the push table saw fails, the power supply should be cut off immediately and the operation should be stopped. Special personnel will repair and adjust it. The machine tool is not allowed to operate with faults.